Cycling VO2 max calculator
Enter a power and your weight to see watts per kilogram and the oxygen cost of holding that power. Used with the peak power from a ramp test, it gives a rough VO2 max for cyclists.
- ACSM leg cycling equation
- Watts per kg shown with every result
- Bike values usually sit below treadmill values
Sources checked November 21, 2026. Page updated November 21, 2026.
On this page
How the cycling equation works
How this is calculated: ACSM leg cycling equation
VO2 = 1.8 × (watts × 6.12) ÷ body weight in kg + 7
- Source
- ACSM metabolic equations
- Built on
- Steady cycling on an ergometer
- Reported error
- Gives the oxygen cost of a steady workload, not a maximum
- Checked
- November 21, 2026, the ACSM book itself was not read; equations as printed by the Compendium of Physical Activities and, for walking and running, in a 2020 peer-reviewed study
The ACSM equation says the oxygen cost of cycling rises in a straight line with power and is shared over body weight, plus a fixed cost for moving the legs and resting metabolism. At 200 watts a 75 kg rider needs about 36.4 mL/kg/min; at 300 watts, 51.1.
If the power you enter is the highest you held at the end of a proper ramp test to exhaustion, the result approximates VO2 max. If it is a steady training power or your functional threshold power, it is the cost of that effort, which is well below your maximum.
Oxygen cost by power and weight
| Power | 60 kg | 75 kg | 90 kg |
|---|---|---|---|
| 150 W | 34.5 | 29.0 | 25.4 |
| 200 W | 43.7 | 36.4 | 31.5 |
| 250 W | 52.9 | 43.7 | 37.6 |
| 300 W | 62.1 | 51.1 | 43.7 |
| 350 W | 71.3 | 58.4 | 49.8 |
| 400 W | 80.4 | 65.8 | 56.0 |
The same power is a bigger share of a light rider's capacity, which is why watts per kilogram matters on climbs.
Peak power and VO2 max in trained cyclists
Hawley and Noakes 1992 tested 100 trained cyclists (54 men, 46 women) and found peak power in a maximal laboratory cycling test was very closely related to measured VO2 max (r 0.97), and also to 20 km time trial times (r -0.91 in 19 riders). The paper's equation is widely quoted, but it is not printed in the abstract and we could not read the full text, so it is not used here.
Conversions from functional threshold power to VO2 max on cycling sites mostly cite no study. We do not offer one.
Why bike values sit below treadmill values
Cycling uses a smaller muscle mass than running, so most people reach a lower VO2 max on a bike. The FRIEND registry found median values higher on the treadmill than on the cycle, and publishes separate cycling standards for that reason (Kaminsky et al. 2022). Compare a bike result with the treadmill tables on this site with care, or compare it with your own earlier bike tests.
Common questions
What is a good watts per kg?
It depends on the duration and the rider. Compare your own results over time, with the same test and power meter.
Can I use FTP to estimate VO2 max?
Not reliably. FTP is a sustained effort, well below the power at VO2 max, and published conversions are unsourced.
Sources
- ACSM's Guidelines for Exercise Testing and Prescription, metabolic equations, as printed by the Compendium of Physical Activities (book not read) checked November 21, 2026
- Hawley JA, Noakes TD. Peak power output predicts maximal oxygen uptake and performance time in trained cyclists. Eur J Appl Physiol 1992;65:79-83 checked November 21, 2026
- Kaminsky LA, Arena R, Myers J, et al. Updated reference standards for cardiorespiratory fitness measured with cardiopulmonary exercise testing: data from FRIEND. Mayo Clin Proc 2022;97(2):285-293 checked November 21, 2026